Configuration
4
Configuring the AP
Configure Device, Internet and Wireless settings for standalone operation or FlexMaster
management.
NOTE If you plan to manage your Ruckus Wireless network using SmartZone or
ZoneDirector controller, refer to their respective user documents, available from the
Ruckus Wireless Support site: http://support.ruckuswireless.com.
If the AP is to be run in a standalone configuration or is to be managed by a FlexMaster
manager, then continue with this section.
In this chapter:
• Configuring Device Settings on page 90
• Configuring Internet Settings on page 92
• Configuring Wireless Settings on page 99
• Configuring Ethernet Ports on page 116
• Configuring Hotspot Service on page 121
Configuring Device Settings
Device settings refer to the device name, location, service provider login and other
settings.
NOTE Some configuration options are available on specific AP models only.
1. Select Configuration > Device. The Configuration > Device page appears.
ZoneFlex Indoor Access Point Release 104.0 User Guide
90
90
To Next Page
Loading...
