EasyManua.ls Logo

Ruckus Wireless ZoneFlex 7782 User Manual

Ruckus Wireless ZoneFlex 7782
148 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Ruckus Wireless
Outdoor Access Point
Release 100.1.0 User Guide
For the following Ruckus Wireless Outdoor Access Points:
- SmartCell 8800-S Outdoor Access Point
- ZoneFlex 7762, 7762-AC, 7762-S, 7762-S-AC and 7762-T Dual-Band 802.11n APs
- ZoneFlex 7781CM Dual-Band 802.11n AP with Integrated Cable Modem
- ZoneFlex 7782, 7782-E, 7782-N and 7782-S Dual-Band 802.11n APs
- ZoneFlex T300 and T300e Omni 802.11ac Outdoor Access Points
- ZoneFlex T301n 30-Degree Narrow Sector 802.11ac Outdoor Access Point
- ZoneFlex T301s 120-Degree Wide Sector 802.11ac Outdoor Access Point
Part Number 800-70863-001 Rev A
Published 2 March, 2015
www.ruckuswireless.com

Table of Contents

Other manuals for Ruckus Wireless ZoneFlex 7782

Question and Answer IconNeed help?

Do you have a question about the Ruckus Wireless ZoneFlex 7782 and is the answer not in the manual?

Ruckus Wireless ZoneFlex 7782 Specifications

General IconGeneral
BrandRuckus Wireless
ModelZoneFlex 7782
CategoryWireless Access Point
LanguageEnglish

Summary

Introducing the Ruckus Wireless Access Point

Overview of the Ruckus Wireless AP

Introduces Ruckus Wireless APs, their features, and management options.

Installing the Access Point

Provides guidance on AP installation procedures and prerequisites.

Getting to Know the Access Point Features

Identifies physical features of various Ruckus Wireless AP models.

Navigating the Web Interface

Before You Begin: Preconfiguring the AP

Outlines prerequisites and initial steps for AP configuration.

Navigating the Web Interface

Explains the elements and layout of the AP's web interface.

When Using a Dual-Band AP

Highlights differences in the web interface for dual-band AP models.

Configuring the Access Point

Configuring Device Settings

Sets device name, location, service provider login, and other parameters.

Configuring Internet Settings

Defines how the AP connects to the local network and the Internet.

Configuring Wireless Settings

Configures wireless modes, country code, and advanced wireless settings.

Configuring Ethernet Ports

Defines behavior for AP's Ethernet ports, including trunking and VLANs.

Configuring Hotspot Service

Enables and configures Hotspot service for user authentication.

Managing the Access Point

Changing the Administrative Login Settings

Modifies the default administrator username and password.

Upgrading the Firmware

Guides on checking and applying software updates to the AP.

Resetting the AP to Factory Defaults

Restores the AP to its original factory settings.

Running Diagnostics

Uses ping and traceroute tools to check network connections.

Appendix: Zone 2 APs

Zone 2 Regulatory Information

Details regulatory information for Zone 2 APs by SKU suffix.

Related product manuals