Ruckus Wireless Outdoor AP 100.1.0 User Guide, 800-70863-001 Rev A 143
Appendix: Zone 2 APs
Some Ruckus Wireless access points can be purchased with the country code
factory configured and locked to a regulatory region referred to as “Zone 2”. AP
ordering numbers with a “Z2” in the suffix, for example 901-R700-Z200, have been
factory locked to the Zone 2 country code setting. End users of these access points
are not able to change the country code setting, operate the AP on non-Z2 channels,
or use non-Z2 transmit power limits.
APs discover and join Ruckus Wireless controllers with matching “Zone 2” or “Z2”
country code settings.
APs with locked Z2 country code settings comply with the Zone 2 regulatory limits
outlined in Table 4 0.
Table 40. Zone 2 Regulatory Information
SKU suffix Locked Country Country
Code
2.4 GHz CH
(1-13) and RF
Power Limit
5.150 GHz-
5.250 GHz
(W52) RF
Power Limit
5.250 GHz-
5.350 GHz CH
(W53) and RF
Power Limit
-WWxx Unlocked Algeria DZ 1-13/100mW
(outdoor
limited to
28mW)
200mW Indoor:
200mW
Outdoor:
1000mW
-WWxx Unlocked Morocco MA 1-13/100mW 200mW 200mW
-WWxx Unlocked Tunisia TN 1-13/100mW 200mW 200mW
-WWxx Unlocked Vietnam VN 1-13/100mW 200mW 200mW
-WWxx Unlocked Israel IL 1-13/100mW 200mW 200mW
-ILxx (
Note) Locked Israel IL 1-13/100mW 200mW 200mW
-Z2xx Locked Zone 2 Z2 1-13/100mW 200mW 200mW
Note: -ILxx is not used for new designs.
To Next Page
Loading...
