Ruckus Wireless ZoneFlex 7782 - Zoneflex T300 Outdoor Access Point

Getting to Know the Access Point Features
ZoneFlex T300 Outdoor Access Point
Ruckus Wireless Outdoor AP 100.1.0 User Guide, 800-70863-001 Rev A 52
ZoneFlex T300 Outdoor Access Point
NOTE The 100.x AP base images support standalone mode and FlexMaster (FM)
WLAN manager operation. The RuckOS-compatible images only support SCG,
vSCG, and SZ controllers. The ZD-compatible images only support ZD controllers.
The T300 requires a minimum of AP base image 100.0.0 and later to operate, or
SCG 2.5.1 and later, vSCG 3.0 and later, RuckOS 3.2 and later, or ZF 9.8.1 and
later to operate. DO NOT connect the T300 AP to a Ruckus Wireless Controller
with ZF 9.8.0 or earlier, or to SCG 2.5.0 or earlier.
Figure 21 identifies the LEDs and connectors on the AP. Ta ble 1 8 describes these
LEDs and other elements.
Figure 21. T300 LEDs and other elements
Table 18. T300 LED and other element descriptions
No. Label Description
1
Earth
ground
screw
Use this screw to attach an earth ground to the AP as required by
local regulations.
2
3
4
5
6 7 81