Do you have a question about the Ruckus Wireless ZoneFlex 7982 and is the answer not in the manual?
2.4 GHz | Yes |
---|---|
Modulation | - |
Frequency band | 2.4 - 5 GHz |
Number of users | 500 user(s) |
Channels quantity | 11 channels |
Networking standards | IEEE 802.11a, IEEE 802.11b, IEEE 802.11e, IEEE 802.11g, IEEE 802.11i, IEEE 802.11n, IEEE 802.1Q, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u |
Wi-Fi data rate (max) | 450 Mbit/s |
Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
Maximum data transfer rate | 1000 Mbit/s |
Supported network protocols | IPv4, IPv6, L2TP, PPPoE, HTTP/S, Telnet/SSH, FTP, TFTP |
Ethernet LAN (RJ-45) ports | 2 |
Security algorithms | 802.1x RADIUS, WEP, WPA-PSK, WPA-TKIP, WPA2-AES |
Antenna features | Integrated antenna |
Antenna gain level (max) | 3 dBi |
Input current | 1.5 A |
AC input voltage | 12 V |
Power consumption (typical) | 7 W |
Internal | No |
Product color | White |
Cable lock slot type | Kensington |
Operating temperature (T-T) | 0 - 50 °C |
Operating relative humidity (H-H) | 0 - 95 % |
Width | 203 mm |
---|---|
Height | 50 mm |
Weight | 1000 g |
Lists related Ruckus Wireless documentation and resources.
Provides contact information for submitting comments and suggestions.
Introduces ZoneFlex APs, their technology, and general features.
Details front and rear panel elements for key AP models.
Covers site surveys, hardware, tools, and initial setup planning.
Guides through initial AP configuration before deployment.
Steps for verifying operation, connecting, and final deployment.
Specific installation instructions for the ZoneFlex 7025 model.
How to log in and use the AP's web-based management interface.
Highlights menu differences for dual band AP models.
Configuration for device name, location, and internet connectivity.
Setup for wireless networks, SSIDs, security, and Ethernet ports.
Steps to deploy and configure Hotspot service and walled gardens.
How to check current device, network, and wireless settings.
Changing logins, enabling access, and FlexMaster management.
Procedures for upgrading firmware, rebooting, and resetting the AP.
Tools for checking network connectivity and troubleshooting.