78
Configuring the Access Point
Configuring Wireless Settings
Configuring Wireless # Settings
The Access Point provides up to eight wireless LANs per radio that can be individually
configured to provide different kinds of services for different kinds of wireless clients,
traffic types or different user groups. Each WLAN can be configured with separate
security settings, VLANs, access controls and rate limiting policies, among other
settings.
Figure 43. Wireless # settings
To configure wireless settings
1. Go to Configuration > Wireless. The Configuration > Wireless > Common page
appears.
NOTE: If you are using a ZoneFlex 7363/7962/7982 AP, go to Configuration > Radio
2.4G or Configuration > Radio 5G.
2. Click one of the eight Wireless (#) tabs. The Configuration > Wireless > Wireless
[#] page appears.
3. Review the WLAN options listed in Table 30
, and then make changes as required.
To Next Page
Loading...
