Do you have a question about the Ruckus Wireless ZoneFlex 7372 and is the answer not in the manual?
2.4 GHz | Yes |
---|---|
Modulation | - |
Frequency band | 2.4 - 2.484 GHz |
Number of users | - user(s) |
Channel bandwidth | 20 MHz |
Channels quantity | 13 channels |
Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
Maximum data transfer rate | 300 Mbit/s |
Ethernet LAN (RJ-45) ports | 2 |
Security algorithms | 802.1x RADIUS, WEP, WPA-PSK, WPA-TKIP, WPA2-AES |
Power consumption (typical) | 3.2 W |
Internal | No |
Operating temperature (T-T) | 0 - 50 °C |
Operating relative humidity (H-H) | 10 - 95 % |
Width | 158 mm |
---|---|
Height | 40 mm |
Weight | 350 g |
Essential safety precautions for installing and operating Ruckus Wireless APs.
Guide to preconfiguring the AP, covering standalone and controller-managed setups.
Steps to verify the AP is operating correctly before full deployment.
Instructions for placing the AP in its final location and connecting it to power and the network.
Steps to resolve common installation issues, including factory reset procedures.
Specific instructions for physically mounting the ZoneFlex 7055 AP to an electrical outlet box.
Instructions for installing the ZoneFlex 7441 DAS AP in distributed antenna systems.
Refers to the H500 AP Quick Setup Guide for physical installation instructions.
How to configure AP device name, location, service provider login, and other settings.
Defines how the AP connects to the local network and the internet, including VLANs and IP addressing.
How to configure APs for routing/NAT functionality using local subnets and DHCP.
Detailed guide to configuring common and individual WLAN settings, including security and encryption.
How to change the default administrator username and password for security.
Procedures for updating the AP firmware manually or scheduling automatic upgrades.
Guide to restoring the AP to its original factory default settings, erasing all configurations.