Viewing Common Wireless Settings
Ruckus Wireless Outdoor AP 100.1.0 User Guide, 800-70863-001 Rev A 122
Viewing Common Wireless Settings
If you want to view the current common wireless settings that the AP is using, go
to the Status > Wireless page (on dual-band APs, go to Status > Radio 2.4G or
Status > Radio 5G).
Figure 50. The Status > Wireless (Radio 2.4G/5G) Common page
Tab l e 36 lists the descriptions of each wireless setting.
Table 36. Common Wireless settings
Setting Description
Wireless Mode Shows the wireless mode that the AP is currently using. Possible
values include:
•
Auto-Select: (For 802.11b/g APs only) Allows both 802.11g-
and 802.11b-compliant devices to connect to the network.
This is the default setting.
•
2.4GHz 54 Mbps: Allows 11g devices only.
•
2.4GHz 11 Mbps: Allows 11b devices only.
•
11ng: Operates with 802.11n, 802.11g and 802.11b devices
in the 2.4GHz spectrum only.
•
11na: Operates with 802.11n and 802.11a devices in the
5GHz spectrum only.
To Next Page
