Configuring Hotspot Service
Working with 802.1X on Wired Ethernet Ports
Ruckus Wireless Outdoor AP 100.1.0 User Guide, 800-70863-001 Rev A 111
Configuring Hotspot Service
Hotspot service can be deployed on standalone Ruckus Wireless APs through the
Web interface. At a minimum, you must configure a login redirect URL and a RADIUS
server to which users are authenticated. Additional options and controls are
provided on subsequent pages.
1 Go to Configuration > Hotspot.
Figure 43. Minimum configuration settings for providing Hotspot service
2 Click Enabled next to Hotspot Service.
3 Review the settings in Ta b le 3 4 , and make changes as needed.
Table 34. Hotspot configuration settings
Setting Description
Redirect unauth. user to Redirect unauthenticated users to the specified URL (login
page).
To Next Page
Loading...
