Configuring Wireless Settings
Configuring Wireless # (WLAN Number) Settings
Ruckus Wireless Outdoor AP 100.1.0 User Guide, 800-70863-001 Rev A 102
Figure 40. Limit per station traffic rates on a specific WLAN
Controlling Access to the Wireless Network
Access Control enables you to specify the stations are allowed to join (associate
with) your wireless networks. Access controls can be configured for each WLAN
from its respective Wireless # (WLAN number) tab.
Access Control List (ACL) Options
This section describes the options that you can use to control access to the wireless
network.
• Disable WLAN access restrictions: The MAC-address-based restrictions on
which stations can join the WLAN are disabled, so any station can join. If the
WLAN uses encryption, then the station must still supply the correct encryption
passphrase. When this option is selected, the Access Controls table is hidden.
• Allow only stations listed in the Access Control Table: Only stations entered
into the access-controls table are allowed, but all others are disallowed. To add
MAC addresses, see Changing Access Controls for a WLAN.
• Deny only stations listed in the Access Control Table: Stations entered into
the access-controls table are disallowed but all others are allowed. To add MAC
addresses, see Changing Access Controls for a WLAN.
To Next Page
Loading...
