ZoneFlex R500
The R500 is a high-performance 2x2:2 802.11ac dual-band AP designed for medium
client density deployments.
NOTE The 100.x AP base images support standalone mode and FlexMaster (FM)
WLAN manager operation. The SmartZone software-compatible images only support
SCG, SZ and vSZ controllers. The ZD-compatible images only support ZD controllers.
NOTE The R500 AP requires a minimum of standalone AP base image 100.0.0 and
later to operate, or SCG 2.5.1 and later, vSZ 3.0 and later, SmartZone software 3.2 and
later, or ZD 9.8.1 and later to operate.
The R500 includes five LEDs on its front panel and buttons and connectors on its rear
panel.
Front View Features
The following figure shows the top view of the R500. For a description of the front panel
LEDs, refer to the table below.
ZoneFlex Indoor Access Point Release 104.0 User Guide
49
Introduction
Getting to Know the AP Features
To Next Page
Loading...
