EasyManua.ls Logo

RUD easy2go - Fitting Snow Chains; Chain Layout and Initial Placement; Securing the Chain Around the Tyre Tread; Four-Wheel Drive Vehicle Instructions

RUD easy2go
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
All the illustrations in this guide
show the RUD easy2go. However,
all the tting steps and instructions
also apply to the easy2go plus
model.
FITTING
All the steps are clearly summa-
rized again in the practical Quick
Guide. Its plastic foil also provides
something to kneel on while tting
the chains.
Do you own a four-wheel drive
vehicle? Its instruction manual will
state on which axle (front or back)
the snow chains should be tted.
A neatly laid out chain makes tting
easier.
Leading with the orange-coloured
ring end (1), pull your chain round
behind the wheel.
The ring (2) should then lie near
the back of the tyre.
Take both ends of the ring and pull
them up around the tyre tread.

Related product manuals