D
Deutsch
GB
English
F
Français
I
Italiano
NL
Nederlands
E
Español
PL
Polski
GR
Ελληνας
RO
Român
5
Now, on the upper part of the
wheel, hook the orange hook (4)
into the eyelet (5). This is easier if
you pull the orange chain a little out
of the ratchet (6). To do this, press
the orange knob.
Slide the wire hoop over the tread
until it lies on the back of the tyre.
The back view on the right shows
the wire hoop lying correctly on the
inner sidewall of the tyre, which
cannot be seen from the front.
Now hook the connecting pieces
(3) together.
The close-up view on the right
shows how the wire hoop looks
when connected.
To Next Page
Loading...
