EasyManua.ls Logo

RUD easy2go - Unhooking Main Connectors; Final Chain Removal

RUD easy2go
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8
Grasp the chain mesh (11) near the
orange hook and by the tensioning
device. Pull it to the centre of the
wheel. This brings the connector
(3) to the front. Open the connec-
tor.
You can now lay the snow chain
on the ground, and remove your
second chain from the other side of
the vehicle.
Then drive away from the chains.
Unhook the orange (4) and grey (7)
hooks.
If the chain does not move
outwards, shake it to loosen, and
make removal easier.

Related product manuals