EasyManua.ls Logo

RUD easy2go - Important Notes and Maintenance; Correct Tyre Size Matching; Chain Wear and Replacement; Speed Limit with Snow Chains

RUD easy2go
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
D
Deutsch
GB
English
F
Français
I
Italiano
NL
Nederlands
E
Español
PL
Polski
GR
Ελληνας
RO
Român
9
NOTES
There is a risk of the chain brea-
king when the links of the chain
mesh have worn below 50 percent.
Do not use chains which are more
than 50% worn – replace them.
Please ensure that your snow
chains are the right size for the
tyres tted to your vehicle. The
type-size designation on the tyres
must be identical with the size
stated on the chain packaging. For
example, there is a big difference
between 195/65-15 and 195-15.
We always accept our packaging
back via our sales network.
Snow chains must not be oiled.
Therefore, wash your chain in
warm water after use and allow
to dry.
RUD provides a repair and modi-
cation service. If necessary, return
the chain to RUD Ketten. You will
nd the address on the back of
your tting guide.
Do not drive at more than 50 kph
(30 mph) with snow chains.
This is the maximum speed per-
mitted under the trafc regulations
in Germany and other countries.
Ö-
Norm
50
Your easy2go, like all RUD snow
chains, fulls the Austrian stan-
dard, and so it is also approved for
use in Austria.

Related product manuals