What to do if Rugged CCTV Security Camera has no action when powered on?
If your Rugged CCTV Security Camera shows no action when powered on, it might be due to a power supply failure. In this case, replace the power supply. Another possible cause is an incorrect power connection. To solve this, check and reconnect the cables.
What to do if Rugged CCTV Ruff Ride has normal self-test but no images?
If your Rugged CCTV Security Camera completes the self-test but displays no images, the issue might stem from a video signal failure, so reinstall the camera. Another potential cause is an incorrect video connection. To resolve this, check and reconnect the cables. The camera might also be damaged, requiring a replacement.
Why Rugged CCTV Ruff Ride has vague image?
If your Rugged CCTV Security Camera displays a vague image, the problem could be a bad video connection. Check and reconnect the cables to resolve this. Alternatively, an inadequate power supply might be the cause, in which case, replace the power supply.
How to fix Rugged CCTV Ruff Ride Security Camera PTZ out of control?
If your Rugged CCTV Security Camera PTZ is out of control, first, the self-test error might be the issue, so restart the camera. Alternatively, a wrong connection of the RS485 cable could be the cause. To fix this, check and reconnect the cables.
General| Brand | Rugged CCTV |
|---|---|
| Model | Ruff Ride |
| Category | Security Camera |
| Language | English |
Explains factory default dip switch settings for camera address configuration.
Guides through the initial power-on procedure, LED indicators, and messages.
Details failure codes and specific notes for PT/T failures during initialization.
Instructions for setting baud rate, protocol, address, and fixing the bottom plate.
Details on how to fix the mounting plate to the target location.
Lists causes and solutions for power-on issues and abnormal motor noise.
Addresses potential causes and solutions for missing or vague image output.
Provides troubleshooting steps for loss of control, incorrect address, and cable issues.
To Next Page