New design of drive system, PTZ positioning precision up to +/-0.05°;
Camera address easily changeable via software;
Baud rate, protocol self-adaptive;
Digital image stabilization;
Image flip for stand / ceiling mount;
Video freeze;
20X optical zoom;
Wide Dynamic Range (WDR);
Day/night (ICR);
10.8~28V voltage input;
Auto power-off with low power supply;
Auto flip;
OSD.
Functions
Soft Address
The camera address can be programmed with a preset command, and the user does not need to
dismount the camera from field or do any screw work.
Self-Adaption of Baud Rate and Protocol
The camera can automatically identify the protocol and baud rate of the controller and adapt the
camera setting accordingly, with no manual DIP Switch involved.
Day/Night Function
The IR cut filter of camera module inside the camera can be removed by sending special command,
so that the camera can change from color to mono.
To Next Page
Loading...