Ruijie Reyee RG-NBR6215-E - Page 16

Cookbook Overview
9
No.
Indicator/Port
Description
5
Hard disk expansion
card slot
Fits the hard disk module. The supported hard disk module model is
RG-NBR-HDD-1T.
2. Specifications of Ruijie RG-NBR6210-E Router
Table 1-9 Specifications of Ruijie RG-NBR6210-E Router
Item
Description
Model
RG-NBR6210-E
Storage
DDR4 SDRAM: 2 GB
BOOTROM: 8 MB
eMMC: 8 GB
SATA: 1 TB (optional)
I/O setup
Eight 10/100/1000M self-adaptive fast Ethernet ports: support automatic
recognition of network cables and cross-over cables.
○ By default, LAN0 (GE 0/0), LAN1/WAN6 (GE 0/1), LAN2/WAN5 (GE 0/2),
LAN3/WAN4 (GE 0/3), LAN4/WAN3 (GE 0/4) and LAN5/WAN2 (GE 0/5)
are LAN ports, while WAN0 and LAN6/WAN1 (GE 0/6) are WAN ports.
○ LAN1/WAN6 (GE 0/1), LAN2/WAN5 (GE 0/2), LAN3/WAN4 (GE 0/3),
LAN4/WAN3 (GE 0/4), LAN5/WAN2 (GE 0/5) and LAN6/WAN1 (GE 0/6)
support the WAN/LAN switchover.
Two SFP ports:
○ Support 1000BASE-SX/LX/ZX mini GBIC and GE-SFP-LX20/LH40-BIDI
SPF modules.
○ By default, these two SFP ports are WAN ports, and support the WAN/LAN
switchover.
One management port (in bridge mode)
One console port
Two USB ports
Hardware disk module
One hardware disk module (optional)
Hot swapping
Not supported
Interface standard
Ethernet: 10Base-T/100Base-TX/1000Base-TX, 1000BASE-SX/LX/ZX,
10GBASE-SR/LR/ZR
Console port: RS-232
Dimension (W x H x D)
440 mm x 43.6 mm x 200 mm (excluding the foot pad)
Voltage
100-240 V; 50/60 Hz
Power
Less than 25 W