1-44
eWeb Configuration (Standalone Mode)
Figure 3-6-5 Port Protection
Enabling or disabling port protection
Click Batch Edit. In the displayed dialog box, enable or disable port protection and select ports. Alternatively, click the toggle
button in the Action column. In the displayed confirmation box, click OK.
3.7 Advanced
The Advanced module includes STP and LLDP.
3.7.1 STP
The Spanning Tree Protocol (STP) is a layer-2 management protocol that eliminates layer-2 loops by selectively blocking
redundant links in the network. It also provides the link backup function.
To Next Page
Loading...
