Need help?Do you have a question about the Ruijie RG-S5310-E Series and is the answer not in the manual?
General| Operating Temperature | 0°C to 45°C |
|---|---|
| Management | Web, CLI, SNMP |
| MAC Address Table | 16K |
| Storage Temperature | -40°C to 70°C |
| Product Series | RG-S5310-E |
| Switch Type | Managed |
| Port Configuration | 24/48 10/100/1000BASE-T ports |
| Uplink Ports | 4 x 10GE SFP+ |
| Dimensions | 440 x 260 x 44 mm |
| Jumbo Frame | 9K |
| Operating Humidity | 10% to 90% (non-condensing) |
| Storage Humidity | 5% to 95% (non-condensing) |
| VLANs | 4094 |
Defines the target users for this document, including engineers and administrators.
Provides contact details and online resources for technical assistance and support.
Explains formatting, symbols, and typographical conventions used throughout the guide.
Lists available switch models and their key hardware specifications like ports and power.
Details the physical layout, ports, and indicators on the front and back panels of the switches.
Explains the meaning of various LED lights on the switch for status and fault indication.
Details the different power supply modules supported by the switches and their specifications.
Covers general, handling, electrical, ESD, and laser safety guidelines for installation.
Specifies site requirements for ventilation, temperature, humidity, cleanliness, and interference.
Details procedures for proper grounding and installing lightning protection devices.
Lists necessary installation tools and guidelines for fiber-optic cable connections.
Instructions for mounting the switch in a rack, on a wall, or on a workbench.
Step-by-step guide for installing AC and DC power supply modules into the switch.
Procedures for grounding the switch and connecting/bundling cables properly.
Steps to confirm that the switch installation has been performed correctly.
Steps to connect a PC and configure terminal emulation settings for switch access.
Checklists and procedures for safely powering on the switch after installation.
Methods to monitor switch status using LEDs and CLI commands.
Guidance on replacing components like fans, power modules, batteries, and fuses.
A systematic flowchart to diagnose and resolve common switch issues.
Addresses specific issues like login failures, power problems, console output, and fiber links.
Details on Ethernet port wiring, pin assignments, and fiber-optic cable types.
Lists specifications for various SFP and SFP+ transceiver modules.
Instructions for installing AC power and Ethernet port lightning arresters.
Best practices for cable bend radius, bundling, and fastening.
Requirements for selecting a suitable equipment room environment.
To Next Page