How to reset Ruijie Switch password?
If you've forgotten the login password for your Ruijie Switch's management interface because it was manually configured, you can restore the default settings by pressing the reset button.
What to do if Ruijie RG-NBS3200 RJ45 port is not in connectivity?
If the RJ45 port of your Ruijie Switch isn't connecting or is experiencing errors in sending/receiving data, it could be due to a faulty twisted pair cable, the cable exceeding 100 meters in length, or a port configuration mismatch. Try replacing the twisted pair cable and ensuring the port configuration is compatible with the connected switch.
Why Ruijie Switch fiber port cannot be connected?
If the fiber port on your Ruijie Switch cannot be connected, it might be due to reversed Rx and Tx ends, an incompatible optical module type, or an incorrect fiber type. Try switching the Rx and Tx ends of the optical fiber, replacing the optical module with a matched type, and ensuring you are using the appropriate fiber type.
What to do if Ruijie RG-NBS3200 Switch Status LED is off after power-on?
If the Status LED on your Ruijie Switch is off after powering it on, the power supply might not be enabled, or the power cable may be loose. Check whether the power socket is working correctly and ensure the power cable is properly connected.
Introduces the manual, audience, and support information.
Details port configurations and general features of the switch series.
Covers technical specs, appearance, panels, heat dissipation, and LEDs.
Covers technical specs, appearance, panels, heat dissipation, and LEDs.
Covers technical specs, appearance, panels, heat dissipation, and LEDs.
Covers technical specs, appearance, panels, heat dissipation, and LEDs.
Covers technical specs, appearance, panels, heat dissipation, and LEDs.
Crucial safety guidelines for installation, ESD, laser, and battery handling.
Specifies environmental conditions, cleanness, interference, and grounding for the installation site.
Lists required tools and measures for lightning resistance and EMI.
Outlines installation flowchart, pre-checks, mounting, and grounding procedures.
Guides on connecting external cables and proper bundling techniques.
Details final verification steps after the switch installation is complete.
Steps to connect a PC and establish the configuration environment.
Procedures for powering on the switch and verifying its operational status.
Provides a flowchart for diagnosing and resolving common switch issues.
Lists specific problems, their causes, and recommended solutions.
Explains wiring for Ethernet ports and optical fiber connections.
Covers specifications for Mini-GBIC, Mini-GBIC-GT, SFP, SFP BiDi, and 10G SFP+ modules and cables.
Instructions for installing AC power and Ethernet port arresters for lightning protection.
Specifies acceptable bend radii for different cable types.
Guidelines for cable bend radius, bundling, and routing to ensure performance and safety.
Specifies criteria for selecting a suitable installation environment for the machine room.
To Next Page
General