Ruijie Reyee RG-ES100 Series

Questions and Answers:

E
Erika RileyAug 10, 2025
What to do if the RJ45 port on my Ruijie Reyee RG-ES100 Switch is not connecting?
- J
  Jonathan McdanielAug 10, 2025
  If the RJ45 port on your Ruijie Switch isn't connecting or is having errors transmitting data, first replace the twisted pair cable, as it may be faulty. Also, verify that the cable length doesn't exceed 100 meters and that the port configuration is compatible with the connected switch. If it exceeds 100 m, check that the port configuration has the common working mode with the connected switch.
M
mjacobsonAug 15, 2025
Why is the status indicator not on after starting my Ruijie Switch?
- K
  Kimberly CrosbyAug 15, 2025
  If the status indicator on your Ruijie Switch doesn't turn on after starting, it could be due to a faulty power module or a loose power cable. Check whether the power socket at the equipment room is normal and whether the power cable is plugged in.
T
Timothy OrtegaAug 19, 2025
How to fix a fiber port connection issue on a Ruijie Reyee RG-ES100?
- X
  xcampbellAug 20, 2025
  If the fiber port on your Ruijie Switch cannot connect, there are several potential causes: * The Rx and Tx ends might be connected reversely, so switch them. * The interconnected optical module type might not match; replace it with a matched type. * The fiber type might be incorrect; replace it with the appropriate type. * The optical fiber might exceed the rated length of the optical module; replace it with one of the appropriate length.
M
Mary AndersonAug 26, 2025
What to do if the Ruijie Reyee RG-ES100 RJ45 port is not connected?
- P
  Paul JonesAug 26, 2025
  If the Ruijie Switch RJ45 port is not connected, the connected twisted pair cable may be faulty or exceed 100m; in this case, replace the twisted pair cable. Also, the port may have a special configuration that does not adapt to the working mode of the connected switch; ensure that the working mode of the port adapts to that of the connected switch.
A
Allen HenryAug 29, 2025
What to do if the Ruijie Reyee RG-ES100 Switch fiber port cannot be connected?
- K
  Kevin KnightAug 30, 2025
  If the fiber port on your Ruijie Switch cannot be connected, it may be due to several reasons: the Rx and Tx ends might be connected reversely (switch the Rx and Tx ends of the optical fiber), the interconnected optical module type might not match (replace the optical module with one of the matched type), or the fiber type might be incorrect (replace the optical fiber with one of the appropriate type).
Y
yhernandezSep 4, 2025
How to fix Ruijie Switch when the optical fiber length exceeds the optical module rating?
- E
  Elizabeth MoralesSep 4, 2025
  Replace the optical fiber with one of the appropriate length.