What to do if RJ45 port is disconnected on Ruijie Switch?
If an RJ45 port is disconnected or experiencing frame sending/receiving errors on your Ruijie Switch, the issue might be a faulty twisted pair cable, a cable length exceeding 100m, or mismatched port configurations. Try replacing the twisted pair cable. Also, check the port configurations to ensure they operate in the same mode as the interconnected switch.
Why is the status indicator off on my Ruijie Reyee RG-ES206GS-P?
If the status indicator is off after powering on the Ruijie Switch, it may be due to a lack of power or a loose power cord. Check if the power socket is working correctly and ensure the power cable is securely connected to the switch.
General| Switch Type | Managed |
|---|---|
| MAC Address Table | 8K |
| Storage Temperature | -40°C to 70°C |
| Power Supply | External power supply |
| Operating Temperature | 0°C to 40°C |
| Operating Humidity | 10% to 90% (non-condensing) |
| Storage Humidity | 5% to 95% (non-condensing) |
| PoE ports | 4 |
| Input power | AC 100-240V |
To Next Page