RG-ES206GS-P Series Switches Hardware Installation and Reference Guide Installing the switch
17
3.4 Verifying Installation
Caution
Turn off the power to avoid personal injury and damage to components caused by incorrect connection.
Verify that the ground wire is connected.
Verify that the Ethernet cables and power cords are properly connected.
Verify that the cables with a distance of 100 meters (328.08 feet) are managed indoors. If not, check whether
the power supply and interfaces are protected from lightning strikes.
Verify that there is a minimum clearance of 100 mm (3.94 in.) around the switch.
To Next Page
Loading...
