Need help?Do you have a question about the Ruijie Reyee RG-ES Series and is the answer not in the manual?
General| Category | Switch |
|---|---|
| Series | Reyee RG-ES |
| Ports | Varies by model (e.g., 8, 16, 24, 48 ports) |
| MAC Address Table | Varies by model (e.g., 8K, 16K) |
| VLAN Support | 802.1Q VLAN |
| Dimensions | Varies by model (e.g., Desktop or Rack-mountable form factors) |
| Weight | Varies by model |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -40°C to 70°C |
| Operating Humidity | 10% to 90% |
| Storage Humidity | 5% to 95% |
| Jumbo Frame | 9216 Bytes |
Identifies the target audience for the document, including network engineers and administrators.
Provides contact information and resources for technical assistance, including website, case portal, and email.
Explains the meaning of GUI symbols used in the document, such as button names, window names, and links.
Defines the meaning of warning, caution, and note alerts used throughout the document for important information.
Defines 'Specification' as an alert type for product or version support information.
Provides general notes about the manual's content, accuracy, and potential discrepancies with actual versions.
Details browser compatibility, screen resolution, and prerequisites for accessing the web management system.
Guides users through connecting the device and logging into the web interface using default credentials.
Explains how to view port status, connection details, and packet statistics using the port status bar and overview.
Describes how to view and clear packet statistics for each port, including Rx/Tx rates and packets.
Covers configuring basic port attributes like status, speed, duplex, and flow control for Ethernet ports.
Details how to configure port mirroring to monitor network traffic on specific ports.
Describes enabling port isolation to isolate downlink ports from each other while allowing communication with uplink ports.
Explains how to configure rate limiting rules for input and output traffic on specific ports.
Guides on configuring the device's management IP address, including dynamic and static IP settings.
Details the procedure for rebooting DC ports, applicable only to specific RG-FS306-D switch models.
Covers viewing, searching, and configuring static MAC address entries for network devices.
Explains how to enable global VLAN settings, create static VLANs, and configure port VLAN modes.
Details enabling DHCP snooping to filter DHCP packets and record IP address usage, specifying trusted ports.
Explains how to configure storm control to prevent network slowdown caused by excessive broadcast or multicast traffic.
Describes the loop guard feature which automatically shuts down ports experiencing network loops.
Details the device's PoE power supply capabilities, including total power, used power, and port status.
Covers viewing device details like hostname, model, firmware, and IP address, and editing the hostname.
Explains how to connect the device to the cloud for remote management via Ruijie Cloud.
Guides on resetting the device management password and handling uniform management password policies.
Provides instructions on how to reboot the switch through the system settings.
Details procedures for local and online system upgrades to update the device firmware.
Explains how to restore the device to its factory default settings, including a reboot.
Guides on checking Ethernet cable status, detecting issues like disconnection or short circuits.
Explains the multi-DHCP alarming feature that detects conflicting DHCP servers in the LAN.
Covers viewing information of the master and discovered switches in the same management VLAN.
Addresses common problems when failing to log into the web management system.
Provides steps for recovering forgotten usernames and passwords by restoring factory settings.
To Next Page