Web-based Configuration Guide Switch Settings
14
3.2 VLAN Settings
3.2.1 Global VLAN Settings
Choose Homepage > Device Info.
This page displays the status of VLAN settings. Toggle the on-off switch to enable or disable VLAN settings.
When VLAN is disabled, the device operates like an un-managed switch. The device forwards packets according
to the destination MAC address, and the VLAN information of the forwarding packets remains unchanged during
the forwarding process.
When VLAN is enabled, the device operates like a managed switch. The device forwards packets according to
the destination MAC address and VLAN ID. Users can configure the port mode (access or trunk) based on
whether a VLAN tag is carried in packets. Besides, all device ports will be initialized to access ports.
3.2.2 Static VLANs Settings
Caution
Static VLANs can be created only when the global VLAN settings feature is enabled. For details, see Chapter
3.2.1.
Choose VLAN Settings > VLAN Members.
Enter VLAN ID and click Add to create a static VLAN.
The VLAN table contains the existing VLANs. Select the VLANs and click Delete, and the corresponding VLANs
will be deleted. VLAN 1 cannot be deleted.
To Next Page
Loading...
Need help?
General