Ruijie Reyee RG-ES Series - PoE Settings; PoE Functionality

Web-based Configuration Guide PoE Settings
19
5 PoE Settings
Caution
Only RG-ES226GC-P, RG-ES218GC-P, RG-ES209GC-P, RG-ES209C-P, RG-ES205GC-P, RG-ES205C-P,
and RG-FS306-P switches support the PoE function.
Choose PoE Settings.
The device supports PoE power supply. Users can view and configure the current power status.
Device status: The total power, used power, remaining power, and current work status of the PoE system are
displayed.
Port status: The voltage, current, output power, and current power status of the device ports are displayed. Users
can enable or disable PoE function through the on-off toggle switch. When PoE is disabled, the port will not
supply power to external devices.
If a PD device fails, please power on the port connected to the PD device again to reboot it.
Note
The fiber ports of RG-ES226GC-P, RG-ES218GC-P, and RG-FS306-P switches do not support the PoE
function.