Web-based Configuration Guide Port Settings
5
2.1.3 Port Packet Statistics
Choose Monitoring > Packet Statistics.
The Packet Statistics page displays the port status, the connection status, Rx/Tx rate (kbps), Rx/Tx packets
(KB), Rx/Tx success, and Rx/Tx failure.
Click Clear to clear current packet statistics of all ports and reset the statistics.
2.2 Setting and Viewing Port Attributes
Choose Switch Settings > Port Settings.
2.2.1 Port Settings
Users can set the basic attributes of the Ethernet ports in batches.
Click Select in the Port column to display options of all device ports. Select the ports you want to configure, and
then select the port status, port rate, port duplex mode, flow control status, and click Save.