1-70
Ad Hoc Network Discovery Mode
1. The operations in Reboot & Reset may affect the whole network. If the system does not respond after configuration
delivery, log into the system again.
4.5 Network Merging
Every network varies in devices and configuration. You can add devices of Other Network to My Network.
When devices exist in different networks, you need to manually add these devices to the current network for network
management.
The following figure shows My Network, Other Network, and a list of new devices.
Figure 4-5-1 Network Merging
Merging networks
Select devices in different networks, and click Add to My Network. In the displayed dialog box, enter the management
password of the current network, and click Add.
1. New devices are configured with factory settings by default. No management password is needed for the merging.
2. Network merging takes a period of time.
To Next Page
Loading...
Need help?
General