Ruijie RG-WLAN Series

Configuration Guide Configuring Fat AP
Ruijie(dot11-wlan-config)# ssid fat_ap
Configures SSID.
Ruijie(dot11-wlan-config)# vlan 1
Configures WLAN VLAN ID.
Ruijie(dot11-wlan-config)# broadcast-ssid
Displays the configured SSID.
Configuring Dot11radio Sub-Interface
Command Function
Ruijie# config
Enters global configuration mode.
Ruijie(config)# interface Dot11radio 1/0.1
Enters Dot11radio sub-interface configuration mode.
Ruijie(config-subif)# encapsulation dot1Q 2
Configures Dot11radio sub-interface VLAN ID 2
Configuring WLAN ID
Command Function
Ruijie# config
Enters global configuration mode.
Ruijie(config)# interface Dot11radio 1/0
Enters Dot11radio main interface configuration mode.
Ruijie(config-if-Dot11radio 1/0)# wlan-id 1
Configures Dot11radio main interface to support WLAN
1.
Configuring Wireless Parameters
Command Function
Ruijie# config
Enters global configuration mode.
Ruijie(config)# interface Dot11radio 1/0
Enters Dot11radio interface configuration mode.
Ruijie(config-if-Dot11radio 1/0)#channel 11
Configures radio channels.
Ruijie(config-if-Dot11radio 1/0)# antenna transmit 7
Configures the transmitting antenna.
Ruijie(config-if-Dot11radio 1/0)# antenna receive 7
Configures the receiving antenna.
Ruijie(config-if-Dot11radio 1/0)# beacon dtim-period 10
Sets the delivery traffic indication message (DTIM)
period.
Ruijie(config-if-Dot11radio 1/0)#beacon period 100
Sets beacon period.
Ruijie(config-if-Dot11radio 1/0)#radio-type 802.11b
Configures the RF mode of the radio
Ruijie(config-if-Dot11radio 1/0)#country-code CNI
Sets a country code.
Ruijie(config-if-Dot11radio 1/0)# fragment-threshold
1500
Sets a fragmentation threshold.
Ruijie(config-if-Dot11radio 1/0)# rts threshold 1500
Sets an RTS threshold.
Ruijie(config-if-Dot11radio 1/0)# chan-width 40
Sets the channel width to 40 MHz.
Ruijie(config-if-Dot11radio 1/0)# slottime long
Sets long slot time.
Ruijie(config-if-Dot11radio 1/0)# short-preamble
Sets the short preamble.
Ruijie(config-if-Dot11radio 1/0)# short-gi enable
chan-width 20
Enables short guard interval (GI) in the channel width of
20 MHz.