RUKO 1601AMP - 4.3 Surface Mode

4.1 RC Amphibious Car Pair Frequency
4.2 Land Mode
4. Operation Guidelines
1. Press down on the body switch to turn on the power of the RC Car.
2. Press the switch down to turn on the remote control.
3. The frequency pairing is performed automatically, and the lights on the
body and transmitter will change from ashing to steady light, indicating
that the frequency pairing is completed.
1. Forward: Long press the upper arrow on the left button.
2. Backward: Long press the lower arrow on the left button.
Forward
Backward
ON / OFF
ON / OFF
1601AMP User Manual
14
Copyright ©2022 Ruko All Rights Reserved.