8
Bottle Assembly
How to Assemble the Expression Collection Combo Kit
Hold the Breast shield Body in one
hand and make sure the bottle-thread
side opening is facing up.
1
Verify that the membrane of
A curled membrane will
result in suction loss.
Insert the Membrane Valve into the
bottom of the Breast shield Body.
2
How to Assemble the Membrane Valve:
Hold the Silicone
Membrane and insert
the small stem into the
top-right opening of
the Valve.
Press hard on the Membrane to
ensure that the stem is completely
inserted and is snug against the
Valve opening.
Membrane
Valve
Assembly
completed.
securely installed.
3
Please insert membrane valve like the
picture above to avoid suction loss.
To Next Page
Loading...
