MODEL 51240B/53540B/53640B/61240B/63540B/63640B
37
In program display mode, press and enter into program set mode.
Press or to adjust the value.
3.5.4. The Steps of Parameter Setting
When time of day “12:12” continuously flash, it reminds
to reset;
1. Press to enter into program display mode; both
and symbol light on，“：”flash；Press , both
and hour value flash, through or to adjust
the hour value;
2. Press again, both and minute value flash,
through or to adjust the minute value;
3. Press and hear a sound “Di”, then finish
adjustment, press to turn back.
1. In control mode display status, press and enter
into program set mode, and 01 value flash；
2. Press or ，set the value to be A-01or A-02
control mode；
3. Press and hear a sound “Di”, then finish
adjustment, press to turn back.
1. In regeneration time display status, press and enter
into program set mode. It shows 02:00. and 02
flash. Press or to adjust the hour value；
2. Press , and 00 flash, press or to adjust
the minute value;
3. Press and hear a sound “Di”, then finish
adjustment, press to turn back.
To Next Page
Loading...
Need help?
General
