MODEL 51240B/53540B/53640B/61240B/63540B/63640B
3
Brine refilling is controlled by electric ball valve, refilled when in service,
shorten the regeneration time.
Brine refilling and service are operating in the meanwhile, for fixed bed,
the water for brine refilling is hard water.
Fixed bed regeneration softener could be converted to filter
system.
Blocking the brine line connector of 61240B/63540B/63640B,
removing the drain connector, the valve could be converted to filter system.
Manual function
Realize regeneration immediately by pushing “ ” at any time.
Long outage indicator
If outage overrides 3 days, the time of day indicator “12:12”will flash to
remind people to reset new time of day. The other parameters do not need
to be reset. The process will continue to work after powering on.
LED dynamic screen display
The stripe on dynamic screen flashes, which indicates the control
valve is in service, otherwise, it is in regeneration cycle.
Buttons lock
No operations to buttons on the controller within 1 minute, button lock
indicator lights on which represents buttons are locked. Before operation
press and hold the “ ”and“ ” buttons for 5 seconds to unlock. This
function can avoid incorrect operation.
It can choose time clock type or meter type by program selection
When all symbols light on, press and hold “ ” and “ ” buttons more
than 2 seconds to enter the menu of valve model selection. Press
“ ”or“ ” buttons to select the requested model, then press “ ” button to
save the selection. Reconnect the power, the model will be showed on
display board.
To Next Page
Loading...
Need help?
General
