Runxin F116Q3 User Manual

MODEL：F67Q/F71Q/F68Q/F69Q/F116Q/F117Q
2
 Please use this product under water temperatures between 5～50℃,
water pressure 0.15～0.6MPa. Failure to use this product under such
conditions voids the warranty.
 If the water pressure exceeds 0.6MPa, a pressure reducing valve
must be installed in front of the water inlet. While, if the water pressure
under 0.15MPa, a booster pump must be installed in front of the water
inlet.
 It is suggested to install PPR pipe, corrugated pipe or UPVC pipe,
instead of TTLSG pipe.
 Do not let children touch or play, because carelessness operating may
cause the procedure changed.
 When the attached cables of this product and transformer are changed,
the replaced must come from our factory.

Runxin F116Q3 Specifications

General

Model	F116Q3
Category	Control Unit
Riser Pipe	1.05" OD
Max Flow Rate	4 m3/h
Drain	1/2" NPT
Brine Line Connector	3/8"
Base	2.5"
Suitable Tank Size (in)	6" - 12"
Water Pressure	0.15 - 0.6 MPa
Water Temperature	5 - 45°C
Power Adapter	Input: 100-240V AC, 50/60Hz; Output: 12V DC, 1.5A