MODEL：F56A/F56B/F56C/N56D/F56E/F56F/F56AC/F56EC
2
Notice
To ensure normal operation of the valve, please consult with
professional installation or repairing personnel before use it.
If there are any of pipeline engineering and electric works, there must
be finished by professional at the time of installation.
Do not use the control valve with the water that is unsafe or unknown
quality.
Depending on the changing of working environment and water
requirement, each parameter of filter should be adjusted accordingly.
Test water periodically to verify that system is performing satisfactorily.
Do not put the valve near the hot resource, high humidity, corrosive,
intense magnetic field or intense librations environment. And do not leave
it outside.
Forbidden to use the drain pipeline or other connectors as support to
carry the system.
Please use this product under the water temperature between 5～
50℃,water pressure 0.15～0.6MPa. Failure to use this product under
such conditions voids the warranty.
If the water pressure exceeds 0.6Mpa, a pressure reducing valve must
be installed before the water inlet. While, if the water pressure under
0.15MPa, a booster pump must be installed before the water inlet.
It is suggested to install PPR pipe, corrugated pipe or UPVC pipe,
instead of TTLSG pipe.
Do not let children touch or play, because carelessness operating may
cause the procedure changed.
We advise you to use M88×2 distributors for N56D top-mounted. It is
easy for disassembly.
To Next Page
Loading...
