Runxin F67Q3 User Manual

Multi-functional Flow Control Valve for
Water Treatment Systems
55504 (Old Model No.:F67Q1)
55604 (Old Model No.:F67Q3)
55502 (Old Model No.:F71Q1)
55602 (Old Model No.:F71Q3)
75504 (Old Model No.:F68Q1)
75604 (Old Model No.:F68Q3)
75502 (Old Model No.:F69Q1)
75602 (Old Model No.:F69Q3)
65505 (Old Model No.:F116Q1)
65605 (Old Model No.:F116Q3)
65503 (Old Model No.:F117Q1)
65603 (Old Model No.:F117Q3)
User Manual
Please read this manual in details before using the valve and
keep it properly in order to consult in the future.
0WRX.466.212
International Patent Public No.:
WO 2006/007772
China Patent No.: ZL201520680239.8
US Patent No.: 7549446
India Patent No.: 232582
Russia Patent No.:2349819
South Korea Patent No.:10-0914137
Mexico Patent No.: 268581
Australia Patent No.: 2005263257
Philippine Patent No.: 1-2006-502553
Taiwan Patent No.:M287896

Runxin F67Q3 Specifications

General

Water Pressure	0.15-0.6 MPa
Water Temperature	5-50°C
Transformer Input	AC 100-240V, 50/60Hz
Drain	1/2" M
Brine Line Connector	3/8" M
Base	2.5"
Riser Pipe	1.05 inch OD

Summary

Initial System Configuration

Program Type Setting

System Configuration

Product Overview

Service Conditions

Structure and Technical Parameters

Installation

Guides on proper installation procedures, including notice and device location.

Basic Setting & Usage

Function of PC Board

Basic Setting & Usage Example

Illustrates parameter setting steps using F116Q3 A-01 as an example.

Applications

PC Board Function and Connection

Explains the control board's main functions, signal outputs, and interlock connectors.

System Configuration and Flow Rate Curve

Covers tank size, material, injector, and flow rate characteristics for various models.

Injector Parameter Table

Provides draw rate data for different injectors across various pressure levels for specific models.

Parameter Settlement

Service Time Calculation

Backwash Time

Parameter Enquiry and Setting

Parameter Enquiry

Parameter Setting

Instructions for entering set mode and adjusting parameter values using control buttons.

Trouble-Shooting

Control Valve Faults

Diagnoses and solutions for issues like failure to regenerate, incorrect timing, and water supply problems.

Controller Faults

Addresses issues with the control board, display, and error codes (E1, E3, E4).