Rupes BR133AE - General Guidelines; Starting Up and Safety; Starting Up Procedures; Safety Instructions

2
SPECIFICATIONS
TYPE
BR133AE
BR135AE
ELECTRIC SHOCK PROTECTION CLASS II II
RATED SUPPLY VOLTAGE ~ 230V-50Hz ~ 230V-50Hz
RATED CURRENT INPUT 1.5A 1.5A
RATED POWER INPUT 300W 300W
ELECTRONIC OVERLOAD PROTECTION YES YES
ELECTRONIC SPEED CONTROL YES YES
WEIGHT [kg] 2 kg 2 kg
MAX. VIBRATION FREQUENCY [1/min.] 5000 - 9500 5000 - 9500
PITCH [mm] 3 mm 5 mm
WORKING DISK [mm] 150 mm 150 mm
ABRASIVE MATERIAL FASTENING Velcro Velcro
DUST EXTRACTION SYSTEM YES YES
DUST EXTRACTION RATE ADJUSTMENT YES YES
GENERAL GUIDELINES
The machine should be used in conjunction with an apprpriate dust extraction system, which may be
ordered separately.
STARTING-UP
Before starting the machine up make sure that:
- the packaging is intact and there is no visible damage due to transport or storage;
- the machine is complete; make sure that the amount and type of components comply with the
instructions;
- the energy source and plug-in sockets may carry the rated power specified in the Table and on the
unit rating plate; rating plate specification is provided on page 6.
INSTRUCTIONS REGARDING SAFETY AND ACCIDENT PREVENTION DURING WORK
Instructions regarding safety and accident prevention during operation are provided in the “Safety Rules”
leaflet, which makes an integral part of these documents; instructions for use provide complementary
information only, which is strictly related to the specific use of the machine.