Need help?Do you have a question about the Rupes BR63AE and is the answer not in the manual?
Identifies the product as a RUPES Random orbital sander with dust extraction.
Detailed specifications for BR63AE and BR65AE models including power, voltage, and speed.
General advice for using the sander with a dust extraction system.
Procedures for initial startup and essential safety precautions.
Identification of key parts of the sander using a diagram.
Steps for correctly assembling the auxiliary grip and heat shield.
Procedures for fitting the working disk and abrasive material.
Essential checks before starting the machine, including power and ventilation.
Instructions on how to operate the ON/OFF switch, including a blocked function.
Performing a test run and adjusting motor speed and dust flow.
Replacing abrasive paper and identifying types used.
Cleaning instructions and information on noise, acceleration, and radio noise.
Details of the warranty coverage and exclusions for the machine.
Explanation of the information found on the machine's rating plate.
To Next Page
General
