Need help?Do you have a question about the RUPTELA fm-eco4 light 3g and is the answer not in the manual?
General| Device Type | GPS Tracker |
|---|---|
| GPS Accuracy | 2.5 m |
| Digital Inputs | 4 |
| Digital Outputs | 2 |
| Analog Inputs | 2 |
| Relay Outputs | 1 |
| GPRS | Class 12 |
| GNSS | GPS, GLONASS |
| Internal memory | 16 MB |
| Accelerometer | Yes |
| 1-Wire interface | Yes |
| Over-the-air configuration | Yes |
| Internal Backup Battery | Yes |
| CAN Support | Yes |
| SIM card | Micro-SIM |
| GSM | Quad-band |
Explains how to use the document and highlights important information.
Details the history of document revisions and their changes.
States the document's objective: providing data, explaining behavior, and configuration.
Lists and defines abbreviations used throughout the manual.
Covers copyright, intellectual property, and trademark notices.
Outlines essential safety precautions and warnings for device operation.
Lists related documents and resources for further information.
Provides an overview of the FM-Eco4 light/light 3G device and its features.
Details the items included in the device package.
Describes the physical dimensions, housing, and connectors of the device.
Lists power consumption, temperature ratings, and common specifications.
Details the function and wire color for each pin on the device connector.
Lists and describes optional accessories that can be connected to the device.
Lists the certifications and compliance standards the device has passed.
Explains the blinking patterns of the GNSS LED indicating signal status.
Describes the GSM LED blinking patterns for signal and data transfer status.
Explains the blinking behavior of the 1-Wire LED for peripheral device status.
Details the synchronized blinking pattern of all LEDs during sleep modes.
Provides instructions and details for safely opening and closing the device enclosure.
Guides on how to connect the device to a PC using a USB cable.
Explains how to insert a SIM card into the device.
Details how to connect the IO cables plug to the device.
Mandatory driver installation for PC recognition of the device.
Guides on downloading and loading configuration files using the configurator tool.
Explains the use of the configuration tool for advanced settings and firmware management.
Covers connection settings, APN, and other global parameters for device configuration.
Details how to set up different profiles for various operating circumstances.
Guides on enabling or disabling IO parameters to be sent to the server.
Provides information on how to acquire integration-related documentation and support.
Provides instructions for correctly installing the device into a vehicle.
Details the correct mounting positions and angles for the device.
To Next Page
