Need help?Do you have a question about the RUPTELA FM-Pro4 and is the answer not in the manual?
Explains the manual's objective and the FM-Pro4 device's function.
Provides contact details for inquiries and legal disclaimers regarding document use.
Details the modifications and updates made to the user manual across different versions.
Highlights essential safety measures to ensure safe operation and prevent damage.
Explains the meaning of various notations and symbols used throughout the document.
Defines common acronyms and abbreviations used in the manual for clarity.
Lists references and links to additional resources for further information.
Presents a visual overview of the FM-Pro4 device and its different model variations.
Lists the main features and capabilities of the FM-Pro4 tracking device.
Details the items provided in the product package, including the device and cables.
Lists the certifications and standards the FM-Pro4 devices comply with.
Describes the status indicated by the device's LED lights under different conditions.
Details the pin configuration and wire colors for the 12-pin connector.
Details the pin configuration and wire colors for the 14-pin connector.
Provides information on the device's dimensions, weight, and housing material.
Specifies the operating and storage conditions for temperature and humidity.
Outlines the device's electrical parameters, including voltage, current, and battery.
Details the power usage of the device in various operating modes.
Describes the GSM/GPRS and GNSS module specifications for data transfer and positioning.
Details the connection for powering the device, including voltage range.
Explains the digital input pins and their functionality for monitoring signals.
Details the CAN bus interfaces for vehicle data reading.
Describes the serial ports (RS232, RS485) for connecting peripherals.
Explains the 1-Wire interface for connecting specific sensors and devices.
Provides step-by-step instructions on how to safely open the device housing.
Guides the user through the process of installing a SIM card into the device.
Instructions for reassembling the device after SIM card insertion.
Explains how to connect the 12-pin and 14-pin cables to the device.
Details the connection of the USB cable for configuration and power.
Instructions for connecting the GNSS antenna cable to the device.
Explains how to connect audio equipment via the 3.5mm audio jack.
Step-by-step guide for installing necessary VCOM drivers for device recognition.
Introduces the Device Center software used for configuring the FM-Pro4 device.
Describes how to launch the Device Center and begin the configuration process.
Explains the layout and elements of the Device Center configuration menu.
Details how to load a configuration file into the device via the Device Center.
Explains how to save the current device configuration to a file.
Describes how to load a configuration directly from the connected device.
Explains how to save a configuration file onto the connected device.
Guides on configuring the IP address, port, and protocol for server communication.
Details how to configure APN, username, and password for internet connectivity.
Explains how to set engine detection methods and data collection rates.
Describes the process for automatically updating the device firmware using the Device Center.
Details the procedure for manually updating the device firmware via the advanced configurator.
Explains the requirements and process for updating firmware remotely over the air.
Describes different methods for connecting the device to vehicle power and ignition.
Provides best practices for mounting and positioning the device in a vehicle.
Offers guidance on the optimal placement of the GNSS antenna for signal reception.
Outlines steps to verify the correct installation and connectivity of the device.
Explains the 'gsminfo' SMS command for checking GSM and GPRS network status.
Details the 'getapn' SMS command for verifying APN and connection parameters.
Explains the 'coords' SMS command to check GNSS fix accuracy and status.
Describes the 'reset' SMS command to restart the device and resolve issues.
To Next Page
General
