Need help?Do you have a question about the RUPTELA FM-Eco4 and is the answer not in the manual?
General| Device Type | GPS Tracker |
|---|---|
| Weight | 150 g |
| GPS Accuracy | 2.5 m |
| GSM frequencies | 850/900/1800/1900 MHz |
| SIM card | Micro SIM |
| Accelerometer | Yes |
| Bluetooth | No |
| Internal Backup Battery | Yes |
| Digital Inputs | 4 |
| Analog Inputs | 1 |
| CAN Support | Yes |
| Power Supply/Operating Voltage | 10 - 30 V DC |
| Connectivity/Communication | GSM, GPRS |
| Memory | 128 MB |
| GNSS | GPS, GLONASS, GALILEO, BEIDOU |
Provides crucial safety instructions and warnings for device operation and installation.
Provides step-by-step instructions for safely opening and reassembling the device enclosure.
Details the mandatory steps for installing drivers to enable computer recognition of the device.
Introduces the advanced configuration functionalities available through the configurator.
Introduces the Global settings section, covering connection and other independent parameters.
Details IP/port settings, server modes, and protocol choices (TCP/UDP).
Covers IP/port settings, two-server mode, APN configuration, and SIM card security features.
Explains SIM status, device locking, driver registration, and sending data without GPS fix.
Covers GNSS selection, geofencing, impact/towing detection, and Eco-Drive functionality.
Details movement sensor sensitivity, authorized IDs, and the purpose of profile settings.
Explains sleep modes, wake-up conditions, and configuring data sending parameters.
Details link timeout settings and the constant link functionality for maintaining server connection.
To Next Page
