Need help?Do you have a question about the RUPTELA FM Pro and is the answer not in the manual?
Lists SMS commands for controlling the FM device and retrieving information.
Retrieves current GPS status including time, latitude, longitude, altitude, satellites, and direction.
Retrieves GSM and GPRS network information such as operator, signal level, and LAC.
Forces a one-time connection to a server with custom IP, port, and protocol settings.
Permanently changes FM device configuration settings for APN, username, password, protocol, and IPs.
Sets the output level (high/low) for Dout1 and Dout2 for a temporary period.
Gets information about CAN settings for FM3/FM4 devices, including manufacturer and type.
Gets the current status of the tachograph, indicating if it's operational or has issues.
Sets DOUTs for a temporary period, defining pulse lengths for logical '1' and '0' values.
Changes FM parameters such as APN, user, IO settings, and modem temperature.
Sets specific IO parameters including ID, profile, enable, level, delta, average, eventOn, include, priority, switch, edge.
Sets specific IO values for parameters like virtual odometer, idling time, and CAN bus distance.
Updates the modem firmware using files from an FTP or HTTP server.
Automatically selects the correct LCV group and subgroup based on CANbus data.
Starts or stops sending device logs to a server and retrieves log data.
Retrieves specific device information by requesting various parameters via SMS.
Sends USSD requests to GSM operators and receives answers via SMS.
Immobilizes the vehicle by controlling progressive DOUTs based on speed.
Sets the DIN mode (positive or negative trigger) for configurable DINs (DIN3 or DIN4).
Takes pictures on demand using connected RS232 cameras.
Informs about driving rule violations like overspeeding, harsh braking, and acceleration.
Configures SMS alerts for events like power supply disconnection and ignition status with date and time.
To Next Page
General
