Need help?Do you have a question about the RUPTELA FM-Plug4 and is the answer not in the manual?
General| Device Type | Touch terminal |
|---|---|
| Category | Touch terminals |
| Manufacturer | RUPTELA |
| Model | FM-Plug4 |
| Bluetooth | Bluetooth 4.0 |
| Battery Backup | Yes |
| Interfaces | RS232, USB |
| GNSS | GPS, GLONASS, Galileo, BeiDou |
| Cellular | 4G LTE |
Defines the scope and objective of the user manual.
Outlines copyright, usage restrictions, and trademark notices.
Provides contact details for general inquiries and technical support.
Lists revisions, dates, and modifications made to the document.
Essential guidelines for safe operation and handling of the device.
Explains symbols and text formatting used to convey important information.
Defines technical terms and abbreviations used throughout the manual.
Lists external resources and documentation for further information.
General description of the FM-Plug4 device and its purpose.
Identifies and illustrates the main parts of the FM-Plug4 device.
Highlights the primary functionalities and capabilities of the device.
Lists items included in the device packaging.
Details the certifications and standards the FM-Plug4 complies with.
Explains the meaning of different LED light patterns on the device.
Details the pin configuration of the device's connector.
Provides dimensions, weight, and material specifications of the device.
Covers environmental, electrical, power consumption, and connectivity details.
Describes the device's interfaces like Power Supply, CAN, K-Line/L-Line.
Step-by-step guide on how to open the device housing safely.
Instructions for inserting the SIM card into the device correctly.
Guide on how to reassemble the device housing after preparation.
Instructions for connecting the device to a computer via USB.
Detailed steps for installing necessary VCOM drivers for device recognition.
Introduction to the Device Center software for device configuration.
Steps to initiate the device configuration using the Device Center.
Explains configuration file handling, loading, and saving.
Covers critical settings like server, APN, and data collection parameters.
Information on accessing and using advanced configuration features.
Details on configuring the device remotely using SMS commands.
Methods and procedures for updating the device's firmware.
Instructions for physically connecting the device to the vehicle's OBD2 port.
Steps to verify the correct installation and initial operation.
Using SMS commands to check GSM and GPRS network connectivity.
Verifying APN and connection settings via SMS commands.
Checking GNSS signal accuracy and fix status using SMS commands.
How to restart the device using an SMS command if issues occur.
To Next Page