RUPTELA FM-Plug4 - SIM Card Installation; Closing the Device Housing

To Next Page

To Previous Page

4.2 Inserting a SIM Card

Insert your SIM card into the device as shown in the image below. The microchip must be facing

down.

All SIM card security codes must be disabled, otherwise the SIM card will not work with the

device.

Use a non-prepaid SIM card to ensure that the balance does not suddenly run out and cause

connectivity issues.

4.3 Closing the Device

To close the device, place the of top the housing on one side of the device as shown in the image

below. Then simply push the other side down until you hear a clicking sound and the housing is

closed.