32
6.7 Updating Firmware
We highly recommend using the newest firmware to take advantage of our newest functionalities
and improvements. Device firmware can be updated in the following ways:
• Automatically when using a configurator that is newer than the firmware
• Manually by sending a firmware file to the device via the advanced configurator
• Over-the-air using your fleet management software
The device will not send any data during firmware updates.
6.7.1 File Extension
Firmware file extension for FM-Plug4 devices: .efwo4
6.7.2 Updating Firmware Automatically
If the Device Center version is newer than the detected device firmware version, it will suggest
updating the firmware. Click Update firmware to update the firmware. If the firmware is not
updated, you will not be able to load and save configuration files from/to the device.
This method does not require an internet connection. This allows you to update the firmware
at any time or location if you have the newest Device Center version.
If the Device Center version is older than the firmware, you will not be able to load and save
configuration files from/to the device. You will need to update the Device Center.
To Next Page
Loading...