R&D department
2018/08/01
1.1.18 Clear obd – clear OBD values
SMS message is used with FM Tco OBD (00.03.XX) device. Purpose is to clear all OBD (On-board diagnostic)
related data in device memory (not configuration). It can be assumed as OBD values reset command.
Example: pass clear obd
Response example: OBD parameters and DTC cleared
1.1.19 IEversion – TCO extender version
SMS message is used with FM Tco TCO (00.04.XX) device. Purpose is to get extender's (optional external FM
gadget) version. Answer SMS format: conf:X,ver:Y
X – status of extender gadget: 0 – no extender / 1 – tachograph is connected to Port A via extender / 2 – tachograph is
connected to Port B via extender / 3 – tachograph is connected to FM Tco TCO device CAN.
Y – extender firmware version (text).
Example: pass ieversion
Response example: conf:1,ver:IE.00.01
1.1.20 Tacho – tachograph status
SMS message is used get tachograph status information. Answer SMS format: TACHO status:X
Status (X) Description
0 Not available.
1 Everything is OK.
2 Tacho parameters not configured.
3 Extender not responding.
4 Tacho task is in progress.
5 Physical communication OK, logical is not OK.
Example: pass tacho
Response example: TACHO status:1
1.1.21 webcoords – Google maps hyperlink with coordinates
SMS message is used to get hyperlink to Google maps with coordinates, current vehicle speed and ignition
status.
Parameter Description
14
To Next Page
Loading...
