EasyManua.ls Logo

RUPTELA FM Pro - 1.1.3 Gsminfo - GSM;GPRS Information

RUPTELA FM Pro
41 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
R&D department
2018/08/01
hdop Current HDOP level.
state Current GPS/GLONASS state: 1-off, 2-on no fix, 3-on got fix, 4-not responding, 5-sleep, 6-
disabled.
Example: pass coords
Response example: 2013-04-24 07:01, lat. 46.1443183, long. 11.881766, alt. 217.5, sat. 8, dir. 198.10, hdop 100, state 3
1.1.2 Version – FM device version
SMS message is used to get current FM device version. Response has 5 parameters.
Parameter Description
1 Bootloader version.
2 Firmware version.
3 Hardware version.
4 GSM signal level.
5
Voltage status: 0 – lower then 8 Volts (bad), 1- higher then 8 Volts (OK).
Exception for new Eco4s product: 0 – lower then 6 Volts (bad), 1- higher then 6 Volts (OK).
Example: pass version
Response example: 5402,00.02.15,1089,5,1
1.1.3 Gsminfo – GSM/GPRS information
SMS message is used to get GSM and GPRS information. Response has 16 parameters.
Parameter Title Description
ST Start Time Date & time (GMT) from the last FM device reset/power ON.
GSM network
OP Operator GSM operator number
lvl Level GSM signal level.
LAC Location Area Code
16 bit number thereby allowing 65536 location areas within one GSM
PLMN.
7

Related product manuals