Ruroc cardo SHOCK WAVE - Specification

BLUETOOTH® VERSION:
DUALMODE BT 5.3 WITH LE AUDIO
SUPPORT:
STARMC1 PROCESSOR, BECO
COPROCESSOR
ELECTRIC PARAMETER:
DC 5V/1A
AUDIO ENCODING FORMAT:
SBC, 4 AAC MPEG2
RIDER-PILLION INTERCOM
COMMUNICATION DISTANCE:
UP TO 100 METERS
BLUETOOTH® HEADSET COMMUNICATION
DISTANCE:
UP TO 10 METERS
CHARGING INTERFACE:
USB TYPEC
PERMISSIBLE OPERATING TEMPERATURE:
20~+45°C / 4~+113°F
RECOMMENDED STORAGE
TEMPERATURE:
5~+30°C / 23~+86°F
WATERPROOF RATING: IP64
SPECIFICATIONATTENTION
1. Installing equipment on the helmet is
a modification of the helmet, which
may cause the helmet’s warranty to
fail or hinder the helmet's function.
This may cause danger in the event of
accidents.
2. Before using the Shockwave
Bluetooth system, please ensure that
the product is firmly and correctly
installed in the helmet. If the product
falls off during riding, it may cause
injury or accident.
3. To ensure riding safety, please use
this product carefully to avoid injury,
serious harm or death.
4. In order to maximise the
communication distance, aim to use
the system in an open space with a
clear line of sight.
5. In the case of rain, please keep the
USB rubber plug tightly installed
during use to prevent water from
entering the device.
6. The device contains a 3.8V/650mAh
LiPoly (Lithium Polymer) battery that
will change with temperature. When
the battery is used at a low ambient
temperature (0°C), the battery life
of the product may be temporarily
reduced, with a risk of permanent
damage.
7. If the electronic functions fail, please
power off the device and try again.