Need help?Do you have a question about the Ruroc EOX SHOCKWAVE BT and is the answer not in the manual?
Important safety instructions to be read before operating the device.
Follow local regulations for discarding used batteries and prevent mixing with household waste.
Avoid short-circuiting the battery with metal objects to prevent damage, injury, or property loss.
Do not expose the battery to fire or high temperatures to prevent overheating or combustion.
Do not disassemble, modify, or puncture the battery to avoid leaks, overheating, or fire hazards.
In case of electrolyte contact with eyes or skin, rinse immediately and seek medical attention.
Use only approved chargers and batteries; stop use if anomalies like bulging or leakage occur.
The battery is not waterproof; avoid use or charging in high humidity or temperature areas.
Do not charge the battery inside flammable objects to prevent overheating or explosion.
Ruroc warrants products against defects in material/workmanship for one year from purchase, subject to terms.
Follow online process at ruroc.com/returns, ensure product is clean, and include necessary details.
Damage from wear, accident, misuse, neglect, or unauthorized repairs is not covered under warranty.
Keep product away from children, use in safe environments, and adhere to traffic laws.
Shut down near medical devices sensitive to radio-frequency; follow institution rules.
Shut down during flights and avoid use near gas stations or fuel storage.
Use only approved accessories and batteries; do not charge while riding.
Remove Bluetooth covers, then insert the battery and Shockwave unit into their respective helmet cavities.
Remove cheek pads, then connect the Mic+Speaker and Speaker-only cables to the helmet's AUX ports.
Attach speakers and microphone to the designated Velcro locations inside the helmet and re-attach cheek pads.
Learn to turn the system on/off, reboot, or factory reset using the control buttons.
Understand the LED indicators for charging status and confirm when the device is fully charged.
Initiate pairing by holding the Select/Phone button, observe LED indicators, and select 'SHOCKWAVE BT' on your device.
Confirm successful Bluetooth connection via voice message and periodic BLUE LED flashes.
Control music playback: play/pause, skip tracks forward and backward using the Media and Intercom buttons.
Adjust volume up/down and pause/resume music playback using the dedicated volume and select/phone buttons.
Pair units by holding the Intercom button, then establish a channel by holding it for 2 seconds.
Answer, reject, cancel, or end calls using the Intercom, Media, Select/Phone, or Volume buttons.
Activate your phone's voice assistant by holding the Select/Phone button for 2 seconds.
Details on FCC rules, interference, and RF exposure limits for the device.
Declaration of compliance with essential requirements and relevant provisions of EU Directive 2014/53/EU.
Information regarding Innovation, Science and Economic Development Canada's licence-exempt RSS compliance.
Installing equipment may affect helmet warranty; ensure firm installation to prevent accidents.
Use the product carefully for safety, aim for open spaces for maximum communication distance, and keep USB port plugged.
Battery life may be reduced at low temperatures; avoid extreme temperatures for optimal performance.
Overview of Bluetooth version, electric parameters, communication distances, charging interface, and waterproof rating.
General| Brand | Ruroc |
|---|---|
| Model | EOX SHOCKWAVE BT |
| Category | Motorcycle Accessories |
| Language | English |
To Next Page
